New Products Being Added Daily - Please Excuse the Mess - 10% Off Bolt Orders with Code: RUSTBUCKET
       
Find a lower price somewhere else? We check daily to make sure we are the lowest. However if you do find a lower price drop us a line and we can usually beat it.
   
On this page you will find JK Wrangler Front Bumpers from JCROffRoad, Poison Spyder, Rugged Ridge, and Smittybilt. These are brands that are trusted and true to us at JeepBolts.com. We have been wheelin for over 30 years. Most the bumpers we sell reach you in 2-3 business days. We have 5 warehouses located around the Continental US. If you are manufacturer who would like to have your bumper considered for our site, please use the Contact Us page. Keep in mind we beat the hell out of every brand of bumper we carry. We have dropped them from 25 story buildings and run them over with bulldozers. If your bumper can't hold up to that don't bother us.

JK Wrangler Front Bumpers

Sort by:
{"id":764884811874,"title":"JCR Offroad Crusader Mid Width Front Winch Bumper - JCRJKFC-T-PC","handle":"jcr-offroad-crusader-mid-width-front-winch-bumper-jcrjkfc-t-pc","description":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFC-T-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eRecessed winch mount\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFC-T-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Crusader Front Winch bumper is designed for those looking for improved clearance, but still want some fender protection for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T21:17:26-06:00","vendor":"JCR Offroad","type":"front bumper","tags":[],"price":83999,"price_min":83999,"price_max":83999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215457693794,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"JCR Offroad Crusader Mid Width Front Winch Bumper - JCRJKFC-T-PC","public_title":null,"options":["Default Title"],"price":83999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_0d1197f6-7c84-4ca8-be93-ebd95050641b.jpg?v=1527823193"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_0d1197f6-7c84-4ca8-be93-ebd95050641b.jpg?v=1527823193","options":["Title"],"content":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFC-T-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eRecessed winch mount\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFC-T-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Crusader Front Winch bumper is designed for those looking for improved clearance, but still want some fender protection for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
JCR Offroad Crusader Mid Width Front Winch Bumper - JCRJKFC-T-PC

JCR Offroad Crusader Mid Width Front Winch Bumper - JCRJKFC-T-PC

$839.99

**Shipped directly from the manufacturer in 2-3 business days** Part Number: JCRJKFC-T-PC Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat Made from 3/16" steel Includes 3/4" thick shackle tabs Accepts factory fog lights Built in Hi-lift Jack points Recessed winch m...


More Info
{"id":764885106786,"title":"JCR Offroad Dagger Stubby Front Winch Bumper - JCRJKFD-0-PC","handle":"jcr-offroad-dagger-stubby-front-winch-bumper-jcrjkfd-0-pc","description":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFD-0-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eIncludes fairlead mounting bracket\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFD-0-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Dagger Front Winch bumper is designed for those looking maximum clearance and a streamlined look for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T21:20:51-06:00","vendor":"JCR Offroad","type":"front bumper","tags":[],"price":75199,"price_min":75199,"price_max":75199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215459594338,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"JCR Offroad Dagger Stubby Front Winch Bumper - JCRJKFD-0-PC","public_title":null,"options":["Default Title"],"price":75199,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_1_4af438b2-ee2f-445e-acc2-9dfd18c80ec3.jpg?v=1527823302"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_1_4af438b2-ee2f-445e-acc2-9dfd18c80ec3.jpg?v=1527823302","options":["Title"],"content":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFD-0-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eIncludes fairlead mounting bracket\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFD-0-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Dagger Front Winch bumper is designed for those looking maximum clearance and a streamlined look for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
JCR Offroad Dagger Stubby Front Winch Bumper - JCRJKFD-0-PC

JCR Offroad Dagger Stubby Front Winch Bumper - JCRJKFD-0-PC

$751.99

**Shipped directly from the manufacturer in 2-3 business days** Part Number: JCRJKFD-0-PC Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat Made from 3/16" steel Includes 3/4" thick shackle tabs Accepts factory fog lights Built in Hi-lift Jack points Includes fairle...


More Info
{"id":764885303394,"title":"JCR Offroad Dagger Stubby Pre-Runner Front Winch Bumper - JCRJKFD-T-PC","handle":"jcr-offroad-dagger-stubby-pre-runner-front-winch-bumper-jcrjkfd-t-pc","description":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFD-0-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eIncludes fairlead mounting bracket\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFD-0-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Dagger Front Winch bumper is designed for those looking maximum clearance and a streamlined look for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T21:23:10-06:00","vendor":"JCR Offroad","type":"front bumper","tags":[],"price":75199,"price_min":75199,"price_max":75199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215460708450,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"JCR Offroad Dagger Stubby Pre-Runner Front Winch Bumper - JCRJKFD-T-PC","public_title":null,"options":["Default Title"],"price":75199,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2_0f0ef774-c166-4029-9e49-43b1150760a9.jpg?v=1527823434"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2_0f0ef774-c166-4029-9e49-43b1150760a9.jpg?v=1527823434","options":["Title"],"content":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFD-0-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eIncludes fairlead mounting bracket\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFD-0-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Dagger Front Winch bumper is designed for those looking maximum clearance and a streamlined look for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
JCR Offroad Dagger Stubby Pre-Runner Front Winch Bumper - JCRJKFD-T-PC

JCR Offroad Dagger Stubby Pre-Runner Front Winch Bumper - JCRJKFD-T-PC

$751.99

**Shipped directly from the manufacturer in 2-3 business days** Part Number: JCRJKFD-0-PC Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat Made from 3/16" steel Includes 3/4" thick shackle tabs Accepts factory fog lights Built in Hi-lift Jack points Includes fairle...


More Info
{"id":764885729378,"title":"JCR Offroad Defender Mid Width Front Winch Bumper - JCRJKFF-T-PC","handle":"jcr-offroad-defender-mid-width-front-winch-bumper-jcrjkff-t-pc","description":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFF-T-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eIncludes fairlead mounting bracket\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFF-T-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Defender Front Winch bumper is designed for those looking for improved clearance, but still want some fender protection for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T21:33:06-06:00","vendor":"JCR Offroad","type":"front bumper","tags":[],"price":81999,"price_min":81999,"price_max":81999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215463854178,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"JCR Offroad Defender Mid Width Front Winch Bumper - JCRJKFF-T-PC","public_title":null,"options":["Default Title"],"price":81999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_3_8b714436-ebc0-4346-8a0c-c4df87e470da.jpg?v=1527824026"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_3_8b714436-ebc0-4346-8a0c-c4df87e470da.jpg?v=1527824026","options":["Title"],"content":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFF-T-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eIncludes fairlead mounting bracket\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFF-T-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Defender Front Winch bumper is designed for those looking for improved clearance, but still want some fender protection for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
JCR Offroad Defender Mid Width Front Winch Bumper - JCRJKFF-T-PC

JCR Offroad Defender Mid Width Front Winch Bumper - JCRJKFF-T-PC

$819.99

**Shipped directly from the manufacturer in 2-3 business days** Part Number: JCRJKFF-T-PC Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat Made from 3/16" steel Includes 3/4" thick shackle tabs Accepts factory fog lights Built in Hi-lift Jack points Includes fairl...


More Info
{"id":764886155362,"title":"JCR Offroad Mauler Stubby Front Winch Bumper - JCRJKFM-T-PC","handle":"jcr-offroad-mauler-stubby-front-winch-bumper-jcrjkfm-t-pc","description":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFM-T-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eRecessed winch mount\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFM-T-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Mauler Front Winch bumper is designed for those looking maximum clearance and an uninhibited approach angle for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T21:36:45-06:00","vendor":"JCR Offroad","type":"front bumper","tags":[],"price":75199,"price_min":75199,"price_max":75199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215465361506,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"JCR Offroad Mauler Stubby Front Winch Bumper - JCRJKFM-T-PC","public_title":null,"options":["Default Title"],"price":75199,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_4_6698c9c4-cac5-4ffb-bf84-9b1619e1a192.jpg?v=1527824286"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_4_6698c9c4-cac5-4ffb-bf84-9b1619e1a192.jpg?v=1527824286","options":["Title"],"content":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFM-T-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eRecessed winch mount\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFM-T-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Mauler Front Winch bumper is designed for those looking maximum clearance and an uninhibited approach angle for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
JCR Offroad Mauler Stubby Front Winch Bumper - JCRJKFM-T-PC

JCR Offroad Mauler Stubby Front Winch Bumper - JCRJKFM-T-PC

$751.99

**Shipped directly from the manufacturer in 2-3 business days** Part Number: JCRJKFM-T-PC Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat Made from 3/16" steel Includes 3/4" thick shackle tabs Built in Hi-lift Jack points Recessed winch mount Made in the USA Mfg...


More Info
{"id":764886548578,"title":"JCR Offroad Vanguard Full Width Front Winch Bumper - JCRJKFV-T-PC","handle":"jcr-offroad-vanguard-full-width-front-winch-bumper-jcrjkfv-t-pc","description":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFV-T-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eIntegrated grill hoop\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eRecessed winch mount\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFV-T-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Vanguard Front Winch bumper is designed for those looking for the maximum fender to fender protection for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T21:42:09-06:00","vendor":"JCR Offroad","type":"front bumper","tags":[],"price":110999,"price_min":110999,"price_max":110999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215466934370,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"JCR Offroad Vanguard Full Width Front Winch Bumper - JCRJKFV-T-PC","public_title":null,"options":["Default Title"],"price":110999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_5_e6edd0fc-86e4-437e-b0e8-af240b52be70.jpg?v=1527824590"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_5_e6edd0fc-86e4-437e-b0e8-af240b52be70.jpg?v=1527824590","options":["Title"],"content":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003e**Shipped directly from the manufacturer in 2-3 business days**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: JCRJKFV-T-PC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003eIntegrated grill hoop\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" thick shackle tabs\u003c\/li\u003e\n\u003cli\u003eAccepts factory fog lights\u003c\/li\u003e\n\u003cli\u003eBuilt in Hi-lift Jack points\u003c\/li\u003e\n\u003cli\u003eRecessed winch mount\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMfg Sku: JKFV-T-PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eJcrOffroad’s Vanguard Front Winch bumper is designed for those looking for the maximum fender to fender protection for the Jeep Wrangler JK. Bumper is CNC cut and formed from 3\/16” Steel and Includes (2) 3\/4” thick shackle tabs. Winch ready using the market standard 10” x 4.5” bottom foot mounting profile and compatible with the Warn Zeon and Warn Powerplant winches. Accepts Factory Fog lights or aftermarket equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
JCR Offroad Vanguard Full Width Front Winch Bumper - JCRJKFV-T-PC

JCR Offroad Vanguard Full Width Front Winch Bumper - JCRJKFV-T-PC

$1,109.99

**Shipped directly from the manufacturer in 2-3 business days** Part Number: JCRJKFV-T-PC Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat Integrated grill hoop Made from 3/16" steel Includes 3/4" thick shackle tabs Accepts factory fog lights Built in Hi-lift Ja...


More Info
{"id":764891398242,"title":"Poison Spyder BFH Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel - PSC17-16-020-DB","handle":"poison-spyder-bfh-front-bumper-with-shackle-tabs-and-brawler-bar-in-bare-steel-psc17-16-020-db","description":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-16-020-DB\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eFeatures an integrated Winch mount\u003c\/li\u003e\n\u003cli\u003eBrawler Bar extends 7.4\" forward from the front edge of the bumper\u003c\/li\u003e\n\u003cli\u003e9.8\" high from the top surface of the bumper\u003c\/li\u003e\n\u003cli\u003eShackle tabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003ePoison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally \"Built For the Hammers\" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeeps frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3\/16\" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks great! The Brawler Bar extends 7.4\" forward from the front edge of the bumper, and 9.8\" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1\" thick plate steel to provide a secure attachment point for 3\/4\" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:01:19-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":42499,"price_min":42499,"price_max":42499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215487774818,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder BFH Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel - PSC17-16-020-DB","public_title":null,"options":["Default Title"],"price":42499,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_4_99d63589-731b-42b3-a826-131065d01779.jpg?v=1527829344"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_4_99d63589-731b-42b3-a826-131065d01779.jpg?v=1527829344","options":["Title"],"content":"\u003cdiv class=\"rte product-single__description\" itemprop=\"description\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-16-020-DB\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eFeatures an integrated Winch mount\u003c\/li\u003e\n\u003cli\u003eBrawler Bar extends 7.4\" forward from the front edge of the bumper\u003c\/li\u003e\n\u003cli\u003e9.8\" high from the top surface of the bumper\u003c\/li\u003e\n\u003cli\u003eShackle tabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003ePoison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally \"Built For the Hammers\" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeeps frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3\/16\" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks great! The Brawler Bar extends 7.4\" forward from the front edge of the bumper, and 9.8\" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1\" thick plate steel to provide a secure attachment point for 3\/4\" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"98004008984\"\u003e\n\u003cdiv class=\"spr-container\"\u003e\n\u003cdiv class=\"spr-header\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Poison Spyder BFH Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel - PSC17-16-020-DB

Poison Spyder BFH Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel - PSC17-16-020-DB

$424.99

Part Number: PSC17-16-020-DB Fits 2007 to 2017 Wrangler, Rubicon and Unlimited 2 and 4-door models Bare steel 3/16" plate steel Features an integrated Winch mount Brawler Bar extends 7.4" forward from the front edge of the bumper 9.8" high from the top surface of the bumper Shackle tabs Poison Spyder Customs BFH front...


More Info
{"id":764891660386,"title":"Poison Spyder BFH II Front Bumper with Trail Stinger in Black - PSC17-16-021-DSP1","handle":"poison-spyder-bfh-ii-front-bumper-with-trail-stinger-in-black-psc17-16-021-dsp1","description":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-16-021-DSP1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eLightweight, high clearance \"stubby\" bumper design\u003c\/li\u003e\n\u003cli\u003e\"Trail Stinger\" made of 1.5\" X .120\" wall DOM tubing with 3\/16\" plate steel gussets\u003c\/li\u003e\n\u003cli\u003eSpyderShell Armor Coat semi-gloss black finish\u003c\/li\u003e\n\u003cli\u003eRecessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)\u003c\/li\u003e\n\u003cli\u003eHigh clearance recovery shackle tabs CNC machined from 1\" thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003ePoison Spyder Customs BFH™ front bumper is designed for strength, simplicity and function. This bumper was literally \"Built For the Hammers\" with the best ground clearance, tire clearance and approach angle possible. It is just slightly wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ II bumper is CNC laser-cut from high strength 3\/16\" plate steel, then precision brake-formed for an exact fit. The BFH™ II bumper features a DOM tube, gusseted Brawler Bar, integrated winch mount, and provisions for mounting the OEM Jeep fog lights. Trail Stinger The Trail Stinger™ is similar in proportion to the famous Poison Spyder Trail Stinger™ for TJ-YJ-CJ, one of our original products. This time-honored design has proven itself on thousands of Jeeps over the years, providing simple, clean lines along with a measure of forward-flop protection. The Stinger is fabricated from 1-1\/2\" DOM tubing. The tubes are CNC laser notched to seat onto two different surface planes of the bumper shell for maximum strength, then further strengthened with CNC laser cut 3\/16\" plate steel gussets. The rake of the Stinger matches the angle of the front surface of the bumper, to provide an un-hindered \"ramp\" if needed, to help the vehicle up onto extreme obstacles. The Trail Stinger™ extends 13.4\" forward from the front edge of the bumper, and 17\" high from the top surface of the bumper. SpyderShell™ Armor Coat Poison Spyder's SpyderShell™ finish is more than just powder coating—it's a complete system that includes the state of the art in preparation, application, materials and packaging to ensure that your SpyderShell™ products stay looking great for years. The SpyderShell™ process has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Our proprietary 6-stage system starts with media blasting the entire part, to remove contaminents and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black--rather than traditional gray--so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, \"super-durable\" architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor aftermarket manufacturer, for which we are confident in offering a 5-year warranty on materials and workmanship. Heavy Duty Recovery Shackle Tabs The high clearance, heavy duty recovery shackle tabs are CNC machined from 1\" thick plate steel to provide a secure attachment point for 3\/4\" recovery shackles. Like the stinger, these tabs are specifically engineered to match the angles of the BFH™ bumper to result in zero loss in approach angle. Recessed Fog Lamp Mounts Recessed fog lamp mounts are designed to easily accept your stock fog lamps. And these aren't just simple light tabs placed behind a hole in the bumper—they're recessed into a tubular \"bucket\" to encircle the lamp and keep light from annoyingly leaking behind and around the bumper. For those who would like more light than the factory fog lamps provide, a set of Rigid Industries Dually or similar LED cube lamps may be installed using our JK Fog Light Mounts for Rigid Industries Dually\/D2. IMPORTANT: The stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do NOT fit into the fog lamp buckets on this bumper. Integrated Winch Mount BFH™ II Bumpers double as a fortified mounting system for your winch. The rugged 3\/16\" plate steel construction provides a strong foundation for recovery equipment. Internal gusseting further strengthens it. Winch mounting bolt holes are provided in two patterns: the popular popular 10\" X 4-1\/2\" mounting pattern used with most common winches, as well as the narrower 6 X 4-1\/2\" pattern used with the lightweight Warn 9.0Rc competition winch. Note: a winch fairlead and fairlead mount will be needed (sold separately). Optional Disco Skid The JK BFH™ II Disco Skid (sold separately) is a bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH™ II bumper, the Disco Skid is made of CNC laser-cut 3\/16\" plate steel and is designed to be a great looking, functional addition to the JK BFH™ II bumper.\u003c\/p\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:05:24-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":54599,"price_min":54599,"price_max":54599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215488135266,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder BFH II Front Bumper with Trail Stinger in Black - PSC17-16-021-DSP1","public_title":null,"options":["Default Title"],"price":54599,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_1_3da4974d-5d2e-47db-9f82-49031751dbec.jpg?v=1527829558"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_1_3da4974d-5d2e-47db-9f82-49031751dbec.jpg?v=1527829558","options":["Title"],"content":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-16-021-DSP1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eLightweight, high clearance \"stubby\" bumper design\u003c\/li\u003e\n\u003cli\u003e\"Trail Stinger\" made of 1.5\" X .120\" wall DOM tubing with 3\/16\" plate steel gussets\u003c\/li\u003e\n\u003cli\u003eSpyderShell Armor Coat semi-gloss black finish\u003c\/li\u003e\n\u003cli\u003eRecessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)\u003c\/li\u003e\n\u003cli\u003eHigh clearance recovery shackle tabs CNC machined from 1\" thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003ePoison Spyder Customs BFH™ front bumper is designed for strength, simplicity and function. This bumper was literally \"Built For the Hammers\" with the best ground clearance, tire clearance and approach angle possible. It is just slightly wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ II bumper is CNC laser-cut from high strength 3\/16\" plate steel, then precision brake-formed for an exact fit. The BFH™ II bumper features a DOM tube, gusseted Brawler Bar, integrated winch mount, and provisions for mounting the OEM Jeep fog lights. Trail Stinger The Trail Stinger™ is similar in proportion to the famous Poison Spyder Trail Stinger™ for TJ-YJ-CJ, one of our original products. This time-honored design has proven itself on thousands of Jeeps over the years, providing simple, clean lines along with a measure of forward-flop protection. The Stinger is fabricated from 1-1\/2\" DOM tubing. The tubes are CNC laser notched to seat onto two different surface planes of the bumper shell for maximum strength, then further strengthened with CNC laser cut 3\/16\" plate steel gussets. The rake of the Stinger matches the angle of the front surface of the bumper, to provide an un-hindered \"ramp\" if needed, to help the vehicle up onto extreme obstacles. The Trail Stinger™ extends 13.4\" forward from the front edge of the bumper, and 17\" high from the top surface of the bumper. SpyderShell™ Armor Coat Poison Spyder's SpyderShell™ finish is more than just powder coating—it's a complete system that includes the state of the art in preparation, application, materials and packaging to ensure that your SpyderShell™ products stay looking great for years. The SpyderShell™ process has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Our proprietary 6-stage system starts with media blasting the entire part, to remove contaminents and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black--rather than traditional gray--so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, \"super-durable\" architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor aftermarket manufacturer, for which we are confident in offering a 5-year warranty on materials and workmanship. Heavy Duty Recovery Shackle Tabs The high clearance, heavy duty recovery shackle tabs are CNC machined from 1\" thick plate steel to provide a secure attachment point for 3\/4\" recovery shackles. Like the stinger, these tabs are specifically engineered to match the angles of the BFH™ bumper to result in zero loss in approach angle. Recessed Fog Lamp Mounts Recessed fog lamp mounts are designed to easily accept your stock fog lamps. And these aren't just simple light tabs placed behind a hole in the bumper—they're recessed into a tubular \"bucket\" to encircle the lamp and keep light from annoyingly leaking behind and around the bumper. For those who would like more light than the factory fog lamps provide, a set of Rigid Industries Dually or similar LED cube lamps may be installed using our JK Fog Light Mounts for Rigid Industries Dually\/D2. IMPORTANT: The stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do NOT fit into the fog lamp buckets on this bumper. Integrated Winch Mount BFH™ II Bumpers double as a fortified mounting system for your winch. The rugged 3\/16\" plate steel construction provides a strong foundation for recovery equipment. Internal gusseting further strengthens it. Winch mounting bolt holes are provided in two patterns: the popular popular 10\" X 4-1\/2\" mounting pattern used with most common winches, as well as the narrower 6 X 4-1\/2\" pattern used with the lightweight Warn 9.0Rc competition winch. Note: a winch fairlead and fairlead mount will be needed (sold separately). Optional Disco Skid The JK BFH™ II Disco Skid (sold separately) is a bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH™ II bumper, the Disco Skid is made of CNC laser-cut 3\/16\" plate steel and is designed to be a great looking, functional addition to the JK BFH™ II bumper.\u003c\/p\u003e"}
Poison Spyder BFH II Front Bumper with Trail Stinger in Black - PSC17-16-021-DSP1

Poison Spyder BFH II Front Bumper with Trail Stinger in Black - PSC17-16-021-DSP1

$545.99

Part Number: PSC17-16-021-DSP1 Lightweight, high clearance "stubby" bumper design "Trail Stinger" made of 1.5" X .120" wall DOM tubing with 3/16" plate steel gussets SpyderShell Armor Coat semi-gloss black finish Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately) High clearance rec...


More Info
{"id":764893462626,"title":"Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs - PSC17-64-020-DBT","handle":"poison-spyder-brawler-full-width-front-bumper-with-brawler-bar-and-shackle-tabs-psc17-64-020-dbt","description":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-64-020-DBT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare Steel\u003c\/li\u003e\n\u003cli\u003eFull-width, multi-faceted design protects lower grille and extends to outer edge of stock flares\u003c\/li\u003e\n\u003cli\u003eCNC laser cut from 3\/16\" plate steel, precision brake-formed for a perfect fit\u003c\/li\u003e\n\u003cli\u003eRecessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)\u003c\/li\u003e\n\u003cli\u003e\"Brawler Bar\" made of 1.5\" X .120\" wall DOM tubing with 1.25\" OD X .120\" wall DOM tube gussets\u003c\/li\u003e\n\u003cli\u003eHigh clearance recovery shackle tabs CNC machined from 1\" thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler™ FULL Width Front Bumper for JK provides the highest ground and tire clearance possible in a full width JK bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their stock JK fender flares. The bumper extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards. Like all bumpers in the Brawler product line, the FULL Width is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not yet offer a powder coat option for this item.\u003c\/p\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:41:47-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":75999,"price_min":75999,"price_max":75999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215494197346,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs - PSC17-64-020-DBT","public_title":null,"options":["Default Title"],"price":75999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2fefb776-5565-4c4b-8747-e3d470b0690f.jpg?v=1527831747"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2fefb776-5565-4c4b-8747-e3d470b0690f.jpg?v=1527831747","options":["Title"],"content":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-64-020-DBT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare Steel\u003c\/li\u003e\n\u003cli\u003eFull-width, multi-faceted design protects lower grille and extends to outer edge of stock flares\u003c\/li\u003e\n\u003cli\u003eCNC laser cut from 3\/16\" plate steel, precision brake-formed for a perfect fit\u003c\/li\u003e\n\u003cli\u003eRecessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)\u003c\/li\u003e\n\u003cli\u003e\"Brawler Bar\" made of 1.5\" X .120\" wall DOM tubing with 1.25\" OD X .120\" wall DOM tube gussets\u003c\/li\u003e\n\u003cli\u003eHigh clearance recovery shackle tabs CNC machined from 1\" thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler™ FULL Width Front Bumper for JK provides the highest ground and tire clearance possible in a full width JK bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their stock JK fender flares. The bumper extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards. Like all bumpers in the Brawler product line, the FULL Width is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not yet offer a powder coat option for this item.\u003c\/p\u003e"}
Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs - PSC17-64-020-DBT

Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs - PSC17-64-020-DBT

$759.99

Part Number: PSC17-64-020-DBT Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Bare Steel Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit Recessed light buckets accept OE fog lamps or Rigid Ind...


More Info
{"id":764893331554,"title":"Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs - PSC17-64-020-D","handle":"poison-spyder-brawler-full-width-front-bumper-with-shackle-tabs-psc17-64-020-d","description":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-64-020-D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare Steel\u003c\/li\u003e\n\u003cli\u003eFull-width, multi-faceted design protects lower grille and extends to outer edge of stock flares\u003c\/li\u003e\n\u003cli\u003eCNC laser cut from 3\/16\" plate steel, precision brake-formed for a perfect fit\u003c\/li\u003e\n\u003cli\u003eRecessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)\u003c\/li\u003e\n\u003cli\u003eHigh clearance recovery shackle tabs CNC machined from 1\" thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler™ FULL Width Front Bumper for JK provides the highest ground and tire clearance possible in a full width JK bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their stock JK fender flares. The bumper extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes recessed fog light buckets and high clearance recovery shackle tabs. Like all bumpers in the Brawler product line, the FULL Width is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not yet offer a powder coat option for this item.\u003c\/p\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:39:22-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":65999,"price_min":65999,"price_max":65999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215493836898,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs - PSC17-64-020-D","public_title":null,"options":["Default Title"],"price":65999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_8_e4d54bcd-a25d-499d-98f4-e748dff021a4.jpg?v=1527831587"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_8_e4d54bcd-a25d-499d-98f4-e748dff021a4.jpg?v=1527831587","options":["Title"],"content":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-64-020-D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare Steel\u003c\/li\u003e\n\u003cli\u003eFull-width, multi-faceted design protects lower grille and extends to outer edge of stock flares\u003c\/li\u003e\n\u003cli\u003eCNC laser cut from 3\/16\" plate steel, precision brake-formed for a perfect fit\u003c\/li\u003e\n\u003cli\u003eRecessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)\u003c\/li\u003e\n\u003cli\u003eHigh clearance recovery shackle tabs CNC machined from 1\" thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler™ FULL Width Front Bumper for JK provides the highest ground and tire clearance possible in a full width JK bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their stock JK fender flares. The bumper extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes recessed fog light buckets and high clearance recovery shackle tabs. Like all bumpers in the Brawler product line, the FULL Width is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not yet offer a powder coat option for this item.\u003c\/p\u003e"}
Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs - PSC17-64-020-D

Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs - PSC17-64-020-D

$659.99

Part Number: PSC17-64-020-D Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Bare Steel Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit Recessed light buckets accept OE fog lamps or Rigid Indus...


More Info
{"id":764892086370,"title":"Poison Spyder Brawler Lite Front Bumper in Bare Steel - PSC17-59-010","handle":"poison-spyder-brawler-lite-front-bumper-in-bare-steel-psc17-59-010","description":"\u003cform name=\"aspnetForm\" method=\"post\" id=\"aspnetForm\" onsubmit=\"javascript:return WebForm_OnSubmit();\" action=\"http:\/\/www.transamericanwholesale.com\/Bumpers-Tire-Carriers-Winch-Mounts\/prodDetail.aspx?partNo=PSC17-52-010DBP1\u0026amp;catID=64\u0026amp;subCat=26\u0026amp;ptID=6410\u0026amp;plID=109243\"\u003e\n\u003cdiv id=\"center\"\u003e\n\u003cdiv id=\"ctl00_ContentPlaceHolder1_pDetailD_panTabContent_Overview\"\u003e\n\u003cdiv id=\"active1\" class=\"tabcontent\"\u003e\n\u003cdiv class=\"col60\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. Unlike the Poison Spyder BFH™ series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:14:30-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":47599,"price_min":47599,"price_max":47599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215488954466,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder Brawler Lite Front Bumper in Bare Steel - PSC17-59-010","public_title":null,"options":["Default Title"],"price":47599,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_1_3d7efa77-3139-4b2b-b0a9-6b66b0a0f0c6.jpg?v=1527830089"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_1_3d7efa77-3139-4b2b-b0a9-6b66b0a0f0c6.jpg?v=1527830089","options":["Title"],"content":"\u003cform name=\"aspnetForm\" method=\"post\" id=\"aspnetForm\" onsubmit=\"javascript:return WebForm_OnSubmit();\" action=\"http:\/\/www.transamericanwholesale.com\/Bumpers-Tire-Carriers-Winch-Mounts\/prodDetail.aspx?partNo=PSC17-52-010DBP1\u0026amp;catID=64\u0026amp;subCat=26\u0026amp;ptID=6410\u0026amp;plID=109243\"\u003e\n\u003cdiv id=\"center\"\u003e\n\u003cdiv id=\"ctl00_ContentPlaceHolder1_pDetailD_panTabContent_Overview\"\u003e\n\u003cdiv id=\"active1\" class=\"tabcontent\"\u003e\n\u003cdiv class=\"col60\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. Unlike the Poison Spyder BFH™ series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e"}
Poison Spyder Brawler Lite Front Bumper in Bare Steel - PSC17-59-010

Poison Spyder Brawler Lite Front Bumper in Bare Steel - PSC17-59-010

$475.99

Part Number: PSC17-59-010 Fits 2007 to 2017 Wrangler, Rubicon and Unlimited 2 and 4-door models Bare steel 3/16" plate steel Mid-width high clearance bumper Ends extend far enough to protect the lower corner of the JK grille Features recessed buckets to mount the factory fog lamps The Brawler Lite front bumper for JK is a grille-wid...


More Info
{"id":764892151906,"title":"Poison Spyder Brawler Lite Front Bumper with Brawler Bar in Bare Steel - PSC17-59-010-B","handle":"poison-spyder-brawler-lite-front-bumper-with-brawler-bar-in-bare-steel-psc17-59-010-b","description":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010-B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Images are for illustrative purposes only, the bumper you will receive will not include shackle tabs. The bumper will be the exact same except for the d-ring mounts.\u003c\/p\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:15:47-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":58999,"price_min":58999,"price_max":58999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215489020002,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder Brawler Lite Front Bumper with Brawler Bar in Bare Steel - PSC17-59-010-B","public_title":null,"options":["Default Title"],"price":58999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2_cde33ba5-3f0a-49a4-9bd4-390ab4eb9bda.jpg?v=1527830175","\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2_fc700755-1c15-4944-9fe1-4c4837911150.jpg?v=1527830198"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2_cde33ba5-3f0a-49a4-9bd4-390ab4eb9bda.jpg?v=1527830175","options":["Title"],"content":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010-B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Images are for illustrative purposes only, the bumper you will receive will not include shackle tabs. The bumper will be the exact same except for the d-ring mounts.\u003c\/p\u003e"}
Poison Spyder Brawler Lite Front Bumper with Brawler Bar in Bare Steel - PSC17-59-010-B

Poison Spyder Brawler Lite Front Bumper with Brawler Bar in Bare Steel - PSC17-59-010-B

$589.99

Part Number: PSC17-59-010-B Fits 2007 to 2017 Wrangler, Rubicon and Unlimited 2 and 4-door models Bare steel 3/16" plate steel Mid-width high clearance bumper Ends extend far enough to protect the lower corner of the JK grille Features recessed buckets to mount the factory fog lamps The Brawler Lite front bumper for JK is a grille-width, hig...


More Info
{"id":764892250210,"title":"Poison Spyder Brawler Lite Front Bumper with Brawler Bar in Bare Steel - PSC17-59-010-B","handle":"poison-spyder-brawler-lite-front-bumper-with-shackle-tabs-in-bare-steel-psc17-59-010-b","description":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010-B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Images are for illustrative purposes only, the bumper you will receive will not include shackle tabs. The bumper will be the exact same except for the d-ring mounts.\u003c\/p\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:17:41-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":58999,"price_min":58999,"price_max":58999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215489118306,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder Brawler Lite Front Bumper with Brawler Bar in Bare Steel - PSC17-59-010-B","public_title":null,"options":["Default Title"],"price":58999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2_ac51b112-6d6d-44f7-9295-16648e6f5b94.jpg?v=1527830306"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_2_ac51b112-6d6d-44f7-9295-16648e6f5b94.jpg?v=1527830306","options":["Title"],"content":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010-B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Images are for illustrative purposes only, the bumper you will receive will not include shackle tabs. The bumper will be the exact same except for the d-ring mounts.\u003c\/p\u003e"}
Poison Spyder Brawler Lite Front Bumper with Brawler Bar in Bare Steel - PSC17-59-010-B

Poison Spyder Brawler Lite Front Bumper with Brawler Bar in Bare Steel - PSC17-59-010-B

$589.99

Part Number: PSC17-59-010-B Fits 2007 to 2017 Wrangler, Rubicon and Unlimited 2 and 4-door models Bare steel 3/16" plate steel Mid-width high clearance bumper Ends extend far enough to protect the lower corner of the JK grille Features recessed buckets to mount the factory fog lamps The Brawler Lite front bumper for JK is a grille-width, hig...


More Info
{"id":764892938338,"title":"Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar - PSC17-59-010DBP1","handle":"poison-spyder-brawler-lite-front-bumper-with-shackle-tabs-and-brawler-bar-psc17-59-010dbp1","description":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010DBP1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003cli\u003eIntegrated winch mount\u003c\/li\u003e\n\u003cli\u003eBrawler bar is 1-3\/4\" diameter .120\" wall DOM tubing\u003c\/li\u003e\n\u003cli\u003eShackle tabs made of 1\" thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1\" thick steel billet, specifically designed to accept our heavy duty 3\/4\" Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.\u003c\/p\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:30:11-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":76599,"price_min":76599,"price_max":76599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215492001890,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar - PSC17-59-010DBP1","public_title":null,"options":["Default Title"],"price":76599,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_4_37c20f56-ae12-4323-b258-7ef93d161870.jpg?v=1527831047"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_4_37c20f56-ae12-4323-b258-7ef93d161870.jpg?v=1527831047","options":["Title"],"content":"\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010DBP1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 JK Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBlack powder coat\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003cli\u003eIntegrated winch mount\u003c\/li\u003e\n\u003cli\u003eBrawler bar is 1-3\/4\" diameter .120\" wall DOM tubing\u003c\/li\u003e\n\u003cli\u003eShackle tabs made of 1\" thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1\" thick steel billet, specifically designed to accept our heavy duty 3\/4\" Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.\u003c\/p\u003e"}
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar - PSC17-59-010DBP1

Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar - PSC17-59-010DBP1

$765.99

Part Number: PSC17-59-010DBP1 Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat 3/16" plate steel Mid-width high clearance bumper Ends extend far enough to protect the lower corner of the JK grille Features recessed buckets to mount the factory fog lamps Integrated winch mount Brawler bar is 1-3/4" diam...


More Info
{"id":764892446818,"title":"Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel - PSC17-59-010-DB","handle":"poison-spyder-brawler-lite-front-bumper-with-shackle-tabs-and-brawler-bar-in-bare-steel-psc17-59-010-db","description":"\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010-DB\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1\" thick steel billet, specifically designed to accept our heavy duty 3\/4\" Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:20:55-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":63999,"price_min":63999,"price_max":63999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215491018850,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel - PSC17-59-010-DB","public_title":null,"options":["Default Title"],"price":63999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_4_2a118165-7e1f-4fce-81d9-849dbd7a69e5.jpg?v=1527830481"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_4_2a118165-7e1f-4fce-81d9-849dbd7a69e5.jpg?v=1527830481","options":["Title"],"content":"\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010-DB\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1\" thick steel billet, specifically designed to accept our heavy duty 3\/4\" Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel - PSC17-59-010-DB

Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel - PSC17-59-010-DB

$639.99

Part Number: PSC17-59-010-DB Fits 2007 to 2017 Wrangler, Rubicon and Unlimited 2 and 4-door models Bare steel 3/16" plate steel Mid-width high clearance bumper Ends extend far enough to protect the lower corner of the JK grille Features recessed buckets to mount the factory fog lamps The Brawler Lite front bumper for JK is a grille-width, ...


More Info
{"id":764892512354,"title":"Poison Spyder Brawler Lite Front Bumper with Shackle Tabs Brawler Bar and Light Tabs in Bare Steel - PSC17-59-010-DBL","handle":"poison-spyder-brawler-lite-front-bumper-with-shackle-tabs-brawler-bar-and-light-tabs-in-bare-steel-psc17-59-010-dbl","description":"\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010-DB\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1\" thick steel billet, specifically designed to accept our heavy duty 3\/4\" Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-07T00:16:03-06:00","created_at":"2018-05-31T23:23:04-06:00","vendor":"Poison Spyder","type":"front bumper","tags":[],"price":63999,"price_min":63999,"price_max":63999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8215491182690,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Poison Spyder Brawler Lite Front Bumper with Shackle Tabs Brawler Bar and Light Tabs in Bare Steel - PSC17-59-010-DBL","public_title":null,"options":["Default Title"],"price":63999,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_e9950e3a-4dd1-4cdc-b8c6-1ae2aa7e07fe.jpg?v=1527830629"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2425\/8981\/products\/images_e9950e3a-4dd1-4cdc-b8c6-1ae2aa7e07fe.jpg?v=1527830629","options":["Title"],"content":"\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cdiv class=\"productspecs\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: PSC17-59-010-DB\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003eFits 2007 to 2017 Wrangler, Rubicon and Unlimited\u003c\/li\u003e\n\u003cli\u003e2 and 4-door models\u003c\/li\u003e\n\u003cli\u003eBare steel\u003c\/li\u003e\n\u003cli\u003e3\/16\" plate steel\u003c\/li\u003e\n\u003cli\u003eMid-width high clearance bumper\u003c\/li\u003e\n\u003cli\u003eEnds extend far enough to protect the lower corner of the JK grille\u003c\/li\u003e\n\u003cli\u003eFeatures recessed buckets to mount the factory fog lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. This bumper is fabricated from 3\/16\" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-notched, NC-bent 1-3\/4\" diameter .120\" wall DOM tubing. The complex laser-cut notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3\/16\" plate steel or CNC laser notched DOM tubing. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeeps frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesnt require frame modifications. The factory \"Crash Bar\" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1\" thick steel billet, specifically designed to accept our heavy duty 3\/4\" Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs Brawler Bar and Light Tabs in Bare Steel - PSC17-59-010-DBL

Poison Spyder Brawler Lite Front Bumper with Shackle Tabs Brawler Bar and Light Tabs in Bare Steel - PSC17-59-010-DBL

$639.99

Part Number: PSC17-59-010-DB Fits 2007 to 2017 Wrangler, Rubicon and Unlimited 2 and 4-door models Bare steel 3/16" plate steel Mid-width high clearance bumper Ends extend far enough to protect the lower corner of the JK grille Features recessed buckets to mount the factory fog lamps The Brawler Lite front bumper for JK is a grille-width, ...


More Info